PlumbRevise
Sign in
Level 2 · Plumbing revision

Low-Carbon & Renewables revision notes

Awareness of the shift off gas — heat pumps, solar thermal and what the Future Homes Standard means for the trade.

Start reading Practice questions
  • 11notes, free to read
  • 85questions; 25 free to try
  • 11topics

Heat Pumps in Low-Carbon Context

  1. Heat pumps in low-carbon heatingA broad introduction to heat sources, electricity use and the conditions that support good performance.

Solar Thermal Hot Water

  1. Solar thermal hot-water principlesHow a solar collector, sealed primary circuit and twin-coil cylinder heat stored water, why backup heat is needed, and how it differs from PV.

The Move to Low-Carbon Heating

  1. Low-carbon heating context and optionsCompare fabric measures, heat pumps, heat networks, solar input and biomass without treating one technology as universal.

Integrating Low-Carbon Heat

  1. Integrating low-carbon heat into a homeBring heat loss, emitters, stored hot water, hydraulics and controls into one workable system.

Low-Carbon Design Awareness

  1. Heat-pump design warning signsA short awareness guide to evidence a specialist heat-pump design should contain.

MCS Certification & Low-Carbon Funding

  1. MCS certification and low-carbon fundingWhat MCS is, why it matters, and how funding like the Boiler Upgrade Scheme fits in.

Low-Carbon Hot Water

  1. Hot water with a heat pumpHow a heat pump heats stored water, the Legionella point, and the role of the immersion.

Biomass & Other Low-Carbon Heat

  1. Biomass heating practical considerationsFuel storage, feed, combustion, buffer storage, ash, flueing and maintenance in biomass systems.

Future Fuels & Heat Networks

  1. Future fuels and heat networks awarenessUse precise language for hydrogen proposals, heat networks and future-ready claims.

Sustainability & the Environment

  1. Sustainable heating decisionsAssess demand, whole-system performance, refrigerant, materials and waste across the installation life.

Solid Fuel & Biomass Safety

  1. Solid-fuel and biomass safety basicsCombustion air, flueing, hearths, fuel, maintenance and carbon monoxide precautions.

Compare heat sources with the building and system in mind

Start renewable-heating revision with the demand the system must meet. Compare how heat is produced, distributed and controlled, and identify which assumptions a proposed change relies on. Equipment labels alone cannot establish suitability for a particular home.

Try the free low-carbon heating questions after a topic. Use the air-source heat-pump notes for a closer look at the refrigeration cycle and system design. The radiator output calculator illustrates why the same emitter has different outputs under different operating temperatures.

More Plumbing modules

Every module has its own revision notes and question bank.

Cold Water SystemsScientific PrinciplesHot Water SystemsCentral HeatingDrainage & SanitationRainwater SystemsHealth & SafetyCommon Plumbing ProcessesElectrical Safety & IsolationField DiagnosticsCSCS & Site SafetyCentral Heating (L3)Cold Water (L3)Hot Water (L3)Domestic Fuels (L3)Sanitation & Drainage (L3)