PlumbRevise
Scientific Principles

Head, pressure and thermal expansion

Note 1 of 15 · free to read

The head/pressure rule of thumb and why heated water needs expansion provision.

A useful plumbing rule of thumb: roughly 1 bar of pressure for every 10 metres of vertical head of water. More head above an outlet means more static pressure at it.

In the normal hot-water operating range, water expands as it warms, so a closed system needs an expansion vessel or other specified provision to accommodate the extra volume. There is a small exception near freezing: liquid water warmed from 0 °C to about 4 °C contracts slightly, reaching its greatest density at about 4 °C. Above that temperature, further warming increases its volume.

A pressure reference point

Standard atmospheric pressure is about 1 bar (101.325 kPa). A gauge referenced to atmosphere reads the difference from the local air pressure, which varies with altitude and weather. Absolute pressure includes atmospheric pressure: it is gauge pressure plus the local atmospheric pressure.

Gas cushions use absolute pressure

For a fixed amount of gas at constant temperature, halving its volume doubles its absolute pressure. For example, with atmospheric pressure approximated as 1 bar, a cushion initially at 1 bar gauge is at 2 bar absolute. Halving its volume gives 4 bar absolute, or 3 bar gauge. This simplified example shows how the cushion compresses; take the vessel size, pre-charge and fill settings from the system instructions.

Pressure passes through an enclosed fluid

By Pascal's principle, a change in pressure applied to an enclosed fluid is passed on undiminished to every part of the fluid and to the walls holding it. A hydraulic system uses this to multiply force. Pressure is force divided by area, so the same pressure acting on a larger piston gives a larger force: with both pistons at the same height and friction ignored, a ram with 20 times the area of the pump piston pushes with 20 times the force, so 200 N in gives 4000 N out. The system cannot give out more work than is put in, though. Work is force times distance, so that ram moves only about a twentieth as far as the pump piston, which is why it takes many pump strokes to move a hydraulic bender's ram a short way.

Air pressure pushes water up a suction pipe

A pump cannot pull water. It lowers the pressure in its suction pipe, and the atmosphere pressing on the open water pushes the water up into the lower-pressure space. One atmosphere, about 101 kPa, balances a column of water about 10.3 m high, so even a perfect vacuum could not lift water any higher by suction, and in practice the lift is less.